FGElectromagnetic Flow Meter
for Non-Full Water
An electromagnetic flow meter that measures a wide range of flow rate from non-full water to full water.
As a drainage flow meter, it is suitable for the measurement of understanding sewage usage and drainage quantity as well as reducing sewage charges.
・Measures non-full water.
・Measures from high flow rate to low flow rate with a high degree of accuracy.
・Can be installed in the middle of piping or in discharge ends depending on the situation.
・Introduces a variable sampling method that is well-equipped to handle solid object falls and flow rate changes.
・Excellent durability under severe conditions because it has no moving parts.
|Flow rate range
|Maximum flow rate Qmax||200||350||550||800|
|Maximum non-full water flow rate Qw *1||50||100||150||300|
|Minimum flow rate Qmin||0.2||0.35||0.55||2.00|
|Accumulated accuracy||Up to ± 2% (Maximum flow rate)Achieves high accuracy within the reading scale (RS) tolerance in most of the extensive ranges of flow rates.|
|Mounting conditions||Hydraulic conditions||Mount in the piping of smooth and natural flow rates.Mount in the location without the impact of backwater from downstream. *2|
|Mounting on discharge ends||Length of straight pipes||Please provide straight piping of 10D or greater in upstream with the same inner diameter as the detector. *2|
|Mounting in the middle of piping||Please provide straight piping of 10D or greater in upstream and 5D or greater in downstream with the same inner diameter as the detector. *2|
|Pipeline slopes *3||Horizontal mounting model||0% *4|
|Inclined mounting model||1 – 10% *4|
|Environmental conditions||Measurable fluid temperature||0 to +45℃|
|Ambient temperature||-10 to +55℃ (No freezing)|
|Liquid pressure||0.3 MPa or less (when full)|
|Conductivity||0.1 – 4.0mS/cm|
|Structure||IPX 8 (10 days in a year in water of 10-meter depth, or 30 days in a year in water of 3-meter depth)|
|Body||Unplasticized polyvinyl chloride|
|Electrodes and grounding ring||SUS316L･SUS304|
|Cable||One dedicated cable, 12 mm, double-line and shieldedStandard cable length is 10 meters
(It can be extended up to 100 meters using optional relay boxes.)
|LCD||Accumulated flow rate (m3)||9999999.9|
|Instantaneous flow rate (m3/h)||999.9|
|External output||Analog output||4 – 20 mA DC
Maximum load resistance is 550 Ω or less (Instantaneous flow rate)
* Can be configured by 1 m3/h
– 4 mA when empty
– 3 mA when there is defective memory
– 2 mA in backflow (Option)
|Pulse output||Open-drain; Pulse unit: 0.1 m3, 1 m3 or 10 m3 (Selection)Max. 25 VDC and 20mA; ON time: 150 ms|
|Environmental conditions||Ambient temperature and humidity||-5 to + 45°C; 85% RH or less (No condensing)|
|Structure||IP 30* Please put the meter in an outdoor panel box when installing outdoors.|
|Power source||100 VAC ± 10% at 50 or 60 Hz|
|Power consumption||20 VA or less|
*1: The maximum non-full water flow rate is a boundary guide between the states of non-full water and full water.
*2: Please contact us for details.
*3: Mount the upstream straight piping and the detector coaxially.
Make sure that the piping inclination in downstream is not lower than that of upstream.
*4: Per mille (‰) is a sign indicating parts per thousand.
Dimensions of Detector
|Mass (kg)||Approx. 20||Approx. 29||Approx. 40||Approx. 54|
Dimensions of Transducer
・Specifications are subject to change without notice.
- Electromagnetic Water Meter
- Electromagnetic Water Meters
- Residential Water Meter
- Portable Water Meter Test Kit
- Electronics Water Meter
- Capacitive Electromagnetic Flowsensor
- Compact Electromagnetic Flow Sensor
- Compact Electromagnetic Flow Sensors
- Microflow Sensor
- Microstream Sensor
- Flow Sensor
- Instantaneous Flow-rate/
Integrating Flow Volume Flowmeter
- Small-size Flowsensor
- Disposable Electromagnetic Flowsensors
- Ultrasonic Flow Meter for Liquid
- Electromagnetic Flow Meters
for Agricultural Applications
- Electromagnetic Flow Meter
for Non-Full Water